2mag-USA Variomag

2mag MIXdrive 1 XS HT Stirring Drive (high temperature) (drive only)

MF 40303

Remote controlled, single point, submersible stirring drive; high temperature version; for small volume applications; stirring volume up to 1,000 milliliters; up to 10 watts of stirring power; requires external control unit (sold separately); see control unit specifications for rpm range; compatible with 2mag MIXcontrol eco Control Unit, 2mag MIXcontrol eco DINrail Control Unit, and 2mag MIXcontrol eco DINrail Potentiometer Control Unit; see 2mag Stirring Drive & Control Unit Compatibility Chart; can also be used with 2mag MIXcontrol 20 Control Unit (and RS232 version) (only in combination with a 2mag distriBOX 4 Distributor and four (4) 2mag MIXdrive 1 XS Stirring Drives) and 2mag MIXcontrol 40 Control Unit (and RS232 version) (only in combination with a 2mag distriBOX 8 Distributor and eight (8) 2mag MIXdrive 1 XS Stirring Drives).


2mag MIXdrive 1 XS HT (high temperature) (drive only) 

For use with MIXcontrol eco or MIXcontrol eco DINrail.

MIXdrive 1 XS HT-Version for up to 95℃ submerged and up to +200℃ in air (ovens).

1 stirring position, 100% maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept for powerful mixing of solutions, jerk-free stirring even at low speeds.

Fully encapsulated and hermetically sealed stainless steel housing, IP68, water-, dust- and germproof, exstemely robust construction and perfomance, easy to clean and maximum resistance, submersible in water- resp. oil baths, suitable for the use in CO 2-incubators and ovens.

2 different temperature areas are available:

Basic version: -10℃ up to +50℃ in air or submerged

HT version: -10℃ up to +95℃ submerged in water baths

                                         up to +200℃ in air (ovens)

Compatible control units: 

MIXcontrol 20/20-RS232 (only in combination with distriBOX 4 & 4 drives)                       

MIXcontrol 40/40-RS232 (only in combination with distriBOX 8 & 8 drives)        

3 years warranty on parts and labor,

developed and made in Germany

(Glassware not included)

Weight (gross):
approximately 0.25 kgs (0.55 lbs)
Dimensions (w x d x h):
approximately 48 x 48 x 18 mm
Protection Category:
IP 68
Operating Conditions:
High Temperature: up to +200°C (in air) and up to +95°C (submerged)
Electrical Data (input):
  • 48 VDC (maximum)
Stirring Points:
Stirring Volume Range (per stirring point):
1 - 1,000 ml
Stirring Power Options:
10 watts (maximum)
Maximum Stirring Volume (per stirring point):
1,000 ml
Drive System:
2mag Inductive Drive (maintenance & wear free)
Cable Length:
  • approximately 2 m (78.74 in)
  • Remote Controlled
  • Single Point
  • Submersible
  • High Temperature