Ultra flat, strong magnetic stirrer with large set-up area and fully automatic stirring bar monitoring mixWATCH, up to 40 litres stirring volume, also suitable for highly viscous media, very strong magnetic coupling by SmCo-magnets, therefore predestined for magnetic power transmission over wide distances or for thick vessel bottoms.
Maintenance-free 2mag-motor-drive with large speed range from 60 up to 2,000 rpm, fully encapsulated and tight stainless steel housing (IP64), extremely robust construction and performance, easy to clean and firm.
Integrated controller with strong 20 watts stirring power, 4-step power setting for high power with regard to large and viscous stirring volumes and reduced power for the warming-free continuous operation, SoftStart-function (adjustable, 4 steps) for reliable catching/ centring and safe accelerating of the stirring bar at different volumes and viscosities, adjustable interval times for automated restart of the stirrer after max. 240 sec.
Digital display for speed-, power-, SoftStart-and interval setting, QuickSet for quick setting of start-and maximum speed, QuickStop-function against after-run and glass break age, storage of last function status when turning off.
NEW: Only available at 2mag:mixWATCH stirring bar monitoring with fully automatic trim of the max. reachable speed for a reliable and unattended operation of the stirrer. 100% Made in Germany, 3 years warranty |
|
Technical specification: Magnetic stirrer MIX 1 XL
| MIX 1 XL | |
| Order No. | MF 30201 (U or E) |
| Stirring points | 1 |
| Stirring volume/point | 500 ml – 40 liters |
| Stirring power (max.) | 20 watts |
| Stirring power, steps | 4 steps, (5/10/15/20 watts) |
| Speed range | 60 – 2,000 rpm |
| Acceleration time, steps | adjustable, 20/30/60/120 seconds |
| Interval time, steps | adjustable, 0 - 240 seconds, steps by 2 |
| Material housing | stainless-steel |
| Material sealing | PUR |
| Dimensions (WxDxH) | 225 x 280 x 35 mm |
| Weight | approx. 4.0 kg |
| Operation conditions (air) | -10 up to +50 °C (at 95% humidity) |
| Storage conditions. | -40 °C up to +70 °C, 10 – 95 %, 500 - 1060 hPa |
| Protection category | IP 64 |
| Operating voltage | 24 VDC |
| Electrical data | 100-240 V / 50-60 Hz / 1.5 A U=with US Cable / E=with Europe Cable |
Specifications are subject to change without advance notice (Glassware not included)
Designed for chemical and biotechnical applications of all kinds as e.g. within the field of quality insurance and pilot plant stations, developed for high demands, unbeaten strong as well as uncompromising continuous operation.
Unbeaten strong magnetic stirrer with large set-up area, up to 150 litres stirring volume, also suitable for highly viscous media, very strong magnetic coupling by SmCo-magnets, therefore predestined for magnetic power transmission over wide distances (up to 60 mm), for thick vessel bottoms or for double-coat vessels.
Maintenance-free 2mag-motor-drive with large speed range from 100 up to 1,200 rpm, fully encapsulated and tight stainless steel housing, IP65, extremely robust construction and performance, easy to clean under running water and firm, individual measurements on request. Integrated control unit with strong 40 watts stirring power, large speed range from 100 up to 1,200 rpm, SoftStart-function (variable 10-60 seconds) for reliable catching/centring and safe accelerating of the stirring bar at different volumes and viscosities.
Digital display for speed- and SoftStart-setting, QuickSet for quick setting of the start-and maximum speed, QuickStop-function against after-run and glass breakage, storage of last function status when turning off, firm stainless steel housing, easy to clean.
3 years warranty on material and manufacturing, |
|
| maxMIX | |
| Order No. | MF 30501 (U or E) |
| Stirring point | 1 |
| Stirring volume | 1 – 150 litres |
| Speed range | 100 – 1,200 rpm |
| Stirring power (max.) | 40 watts |
| Housing material | stainless-steel |
| Sealing material | PUR |
| Measurements (WxDxH) | 265 x 320 x 68 mm |
| Weight | approx. 9.3 kg |
| Permitted operation conditions | -10 up to +50 °C (at 80% humidity) |
| Permitted storage conditions | -40 °C up to +70 °C, 10 – 95 %, 500 - 1060 hPa |
| Protection category | IP 64 |
| Electrical data | 100–240 V / 50-60 Hz / 1.5 A U=with US Cable / E=with Europe Cable |
Specifications are subject to change without advance notice (Glassware not included)
Designed for chemical and biotechnical applications of all kinds as e.g. within the field of quality insurance and pilot plant stations, developed for highest demands, unbeaten strong, high stability as well as for uncompromising continuous operation.
Unbeaten strong magnetic stirrer with large set-up area, up to 250 litres stirring volume, also suitable for highly viscous media, very strong magnetic coupling by SmCo magnets, therefore predestined for magnetic power transmission over wide distances (up to 60 mm), for thick vessel bottoms or for double-coat vessels, ideal for the integration into process engineering systems.
Maintenance-free 2mag-motor-drive with large speed range from 100 up to 1,200 rpm. Fully encapsulated and tight stainless steel housing, IP65, extremely robust construction and performance, easy to clean under running water and maximum firm. Individual measurements on request. 3 years warranty on material- and manufacturing, developed and made in Germany.
Control unit for the connection of MAXdrive, powerful 40 watts stirring power, large speed range from 100 up to 1,200 rpm, variable SoftStart-function for reliable catching/centring and safe accelerating of the stirring bar at different volume and viscosities.
Digital display for speed- and SoftStart-setting (variable, 10-60 seconds), QuickSet for quick setting of the start-and maximum speed, QuickStop-function against after-run and glass breakage, storage of last function status when turning off, firm stainless steel housing, easy to clean.
3 years warranty on material- and manufacturing, developed and made in Germany.
Note: Please order the control units separately!
Technical specification: Magnetic stirrer MAXdrive with control unit MAXcontrol
| MAXdrive | MAXcontrol | |
|---|---|---|
| Order No. | MF 50001 | MF 94400 (U or E) |
| Stirring point | 1 | - |
| Stirring volume | 1 – 250 liters | - |
| Speed range | 100 – 1,200 rpm | 100 – 1,200 rpm |
| Stirring power (max.) | 40 watts | |
| Acceleration | variable, 10-60 seconds | |
| Housing material | stainless-steel | |
| Measurements (WxDxH) | 260 x 260 x 68 mm | 200 x 175 x 48 mm |
| Weight | approx. 9.0 kg | approx. 1.8 kg |
| Permitted operation conditions | -10 up to +50 °C (at 95% humidity) | 0 up to +40 °C (at 80% humidity) |
| Permitted storage conditions. | -40 °C up to +70 °C, 10 – 95 %, 500 - 1060 hPa | |
| Protection category | IP 64 | IP 20 |
| Electrical data | 48 V | 100-240 V/50-60 Hz/1.5 A (U=US Cable) (E=Europe Cable) |
|
Advantage box Up to 250 litres stirring volume Stirring over wide distances Ideal for viscous media Outstanding long-life quality 3 years warranty |
Note: Please order the control units separately! |
 Single High Volumes Stirrer-Pg.04_img_0.jpg)
Specifications are subject to change without advance notice (Glassware not included)
